Steel Structural Services

Steel Structural Services – Building Zimbabwe’s Backbone with Precision Engineering

Flypole Alumin, operating from 202 Seke Road, Graniteside, Harare, delivers comprehensive steel structural services – from concept design through fabrication to site erection. With coded welders, certified engineers, and a 2,000m² fabrication facility, we execute structural steel projects of any scale across Zimbabwe: commercial towers, industrial plants, agricultural infrastructure, and residential frameworks.

Why Structural Steel? The Smart Builder’s Choice

Structural steel dominates modern construction for compelling reasons:

Speed of Construction

  • Off-site fabrication – 70-80% complete before site arrival
  • Rapid erection – Weeks not months for structural frame
  • Early weather-tight envelope – Follow-on trades start sooner
  • Program certainty – Factory conditions eliminate weather delays

Strength-to-Weight Excellence

  • High strength per kg – Lighter foundations, smaller columns
  • Long spans – 15-30m+ column-free spaces routine
  • Vertical extension – Easy addition of floors to existing structures
  • Seismic resilience – Ductile behavior, energy absorption

Design Freedom

  • Architectural expression – Exposed steel as aesthetic feature
  • Complex geometries – Curves, tapers, nodes, tension structures
  • Integration – Services, facades, fire protection, acoustics
  • Adaptability – Future modification, strengthening, relocation

Sustainability

  • 90%+ recycled content – Circular economy leader
  • 100% recyclable – End-of-life value, not waste
  • Precision fabrication – Minimal site waste
  • Lightweight transport – Lower carbon footprint

Our Structural Steel Capabilities

1. Design & Engineering Services

Conceptual Design

  • Architect collaboration – Early involvement optimizes outcomes
  • Scheme design – Grid optimization, member sizing, connection concepts
  • Value engineering – Alternative systems, material savings, buildability
  • 3D modeling – Tekla Structures, Advance Steel, Revit interoperability

Detailed Engineering

  • Connection design – Moment, shear, splice, base, bracing connections
  • Stability systems – Braced frames, moment frames, core systems
  • Second-order analysis – P-Delta, imperfections, notional loads
  • Fire engineering – Critical temperature, protection optimization
  • Fatigue assessment – Crane girders, dynamic loads, cyclic stress

Documentation Package

  • General arrangement drawings – Plans, elevations, sections, 3D views
  • Fabrication drawings – Shop details, cut lists, weld maps, CAM data
  • Erection drawings – Sequence, lifts, temporary works, tolerances
  • Calculation reports – SANS 10162, Eurocode 3, AISC 360 as required
  • BIM deliverables – IFC, Navisworks, COBie for facility management

2. Fabrication Facility – 202 Seke Road, Graniteside

Capacity & Equipment

  • Floor area: 2,000m² under crane coverage
  • Overhead cranes: 2 x 10t, 1 x 5t – 12m hook height
  • Cutting: CNC plasma/oxy (3000x12000mm), bandsaw (1000mm capacity)
  • Drilling: CNC beam drill line (1000mm depth), magnetic drills
  • Welding: 20+ bays, SAW, MIG, MMA, TIG – coded to ASME IX / ISO 9606
  • Finishing: Shot blast (Sa 2.5), paint booth (12m length), galvanizing coordination
  • Assembly: Fit-up jigs, trial assembly area, dimensional QC stations

Quality Management

  • ISO 9001-aligned Factory Production Control (FPC)
  • Weld procedure specifications (WPS) qualified per project
  • Welder qualification records – Continuous verification
  • Material traceability – Mill certificates linked to cut pieces
  • Inspection & test plans (ITP) – Hold/witness points agreed with client
  • Third-party inspection – SGS, Bureau Veritas, client reps welcome

Material Procurement

  • Prime steel only – ArcelorMittal, Macsteel, local stockists
  • Grade range: S275, S355, S460, 300WA, 350WA, Gr50, Gr350
  • Sections: UB, UC, PFC, RSA, RSC, RHS, SHS, CHS, plate, flats
  • Import capability – Special grades, heavy sections, HISTAR
  • Consignment stock – Client-nominated materials managed on-site

3. Project Types & Sector Expertise

Commercial Buildings

  • Office towers – Composite construction, cellular beams, long spans
  • Shopping centers – Atrium roofs, feature staircases, façade support
  • Hotels & hospitality – Complex geometries, prefabricated modules
  • Mixed-use – Podium/transfer structures, basement integration

Industrial & Mining

  • Process plants – Pipe racks, equipment structures, access platforms
  • Warehouses & logistics – Portal frames, mezzanines, crane girders
  • Mining infrastructure – Headgears, conveyor galleries, crusher houses
  • Power generation – Turbine halls, boiler houses, stack structures

Agricultural & Rural

  • Grain silos & storage – Hopper bins, dryers, conveying structures
  • Livestock housing – Poultry, dairy, piggery – corrosion-resistant
  • Greenhouses – High-tech glasshouse structures, climate control integration
  • Processing facilities – Abattoirs, packhouses, cold stores

Residential & Light Commercial

  • Steel-framed homes – Light gauge & hot-rolled hybrid systems
  • Rooftop extensions – Lightweight addition on existing buildings
  • Garages & workshops – Portal frames, mezzanine storage
  • Swimming pool structures – Indoor pool enclosures, retractable roofs

Infrastructure & Public Works

  • Pedestrian bridges – Truss, arch, cable-stayed, stressed ribbon
  • Road/rail overpasses – Incremental launch, slide-in, modular
  • Grandstands & stadia – Tiered framing, cantilever roofs
  • Water treatment – Tank supports, building frames, access structures

4. Specialized Structural Systems

Portal Frames – The Industrial Standard

  • Haunched rafters – Plastic design, material optimization
  • Tapered members – Variable depth, architectural expression
  • Eaves & apex details – Moment connections, service integration
  • Bracing systems – Rod, angle, portal, diaphragm action
  • Crane integration – Runway beams, columns, lateral restraint

Multi-Story Frames

  • Composite construction – Steel beams + concrete slab (shear studs)
  • Slimdek / Asymmetric beams – Shallow floor, services integration
  • Cellular beams – Web openings for services, aesthetic soffit
  • Moment frames – Rigid connections, drift control
  • Braced cores – Concrete or steel, lateral stability

Long-Span Structures

  • Trusses – Warren, Pratt, Howe, Vierendeel, bowstring
  • Space frames – Modular nodes, double-layer grids
  • Cable structures – Tension roofs, facades, suspended floors
  • Arch & shell – Steel ribs, stressed skin, form-found geometry

Tension & Compression Members

  • Hollow sections – CHS, SHS, RHS for compression efficiency
  • Built-up sections – Battened, laced, perforated cover plates
  • Tension rods & cables – Fork/socket end fittings, pre-tensioning
  • Struts & ties – Bracing, tie-downs, temporary works

5. Connection Engineering – The Critical Detail

Bolted Connections

  • Preloaded (HR/HV) – Category B, C, D per SANS 10162
  • Non-preloaded – Category A, shear bearing
  • Tension connections – Prying action, end plate design
  • Shear connections – Fin plate, web cleat, end plate
  • Splice connections – Beam, column, tension member

Welded Connections

  • Full penetration butt – Moment continuity, column splices
  • Fillet welds – Shear transfer, stiffeners, brackets
  • Partial penetration – Specific applications, fatigue control
  • Weld access holes – Geometry, backing, inspection
  • Shop vs. field welds – Logistics, quality, economy balance

Base Plates & Anchorage

  • Anchor bolt design – Tension, shear, combined, edge distance
  • Grout detailing – Non-shrink, flowable, thickness control
  • Leveling nuts & shims – Setting accuracy, load transfer
  • Embed plates – Cast-in, post-installed, headed studs

6. Corrosion Protection Systems

Atmospheric Corrosion Categories (ISO 12944)

  • C1-C2 – Interior, dry – Shop primer only
  • C3 – Urban/industrial – 2-coat epoxy (120-160µm)
  • C4 – Coastal/chemical – 3-coat epoxy/PU (200-280µm)
  • C5-M/I – Marine/industrial severe – 3-4 coat (300-400µm)

Protection Methods

  • Hot-dip galvanizing – ISO 1461, 85µm+ typical, duplex option
  • Thermal spray (TSA) – Aluminum/zinc, sealed, 200-300µm
  • Intumescent fire+corrosion – Dual function, aesthetic finish
  • Stainless steel – 304/316/2205 for extreme environments
  • Weathering steel – Cor-Ten, architectural patina, no coating

Quality Control

  • DFT measurement – Calibrated gauges, statistical sampling
  • Adhesion testing – Cross-cut, pull-off per ISO 4624/16276
  • Holiday detection – Pipeline/immersion coatings
  • Salt spray testing – Accelerated validation (lab)

7. Erection & Site Services

Planning & Methodology

  • Erection sequence – Crane positions, lift weights, radii
  • Temporary works – Bracing, guys, props, falsework design
  • Safety plans – Fall protection, lifting plans, exclusion zones
  • Logistics – Delivery sequence, laydown, just-in-time

Equipment Fleet

  • Mobile cranes – 50t to 300t (partner network)
  • Tower cranes – For high-rise, long duration
  • Telehandlers/cherry pickers – Access, bolt-up, alignment
  • Survey equipment – Total stations, levels, laser trackers

Tolerance Control (SANS 10162 / AISC 303)

  • Plumbness: H/500 max 25mm (columns), H/300 (walls)
  • Levelness: 10mm per bay, 25mm overall
  • Position: ±10mm grid, ±5mm relative
  • Documentation – As-built surveys, deviation reports

Integration Management

  • Concrete interface – Anchor bolts, pockets, corbels, slabs
  • Facade interface – Brackets, tolerances, adjustment
  • Services coordination – Penetrations, supports, access
  • Fire protection – Intumescent, board, spray – pre/post erection

Why Choose Flypole Alumin for Steel Structural Services?

1. Full In-House Capability

Design → Detail → Fabricate → Paint/Galvanize → Deliver → Erect. Single-point responsibility.

2. Engineering-Led Fabrication

Our engineers detail the connections they design. No “detailer vs. engineer” conflicts. Optimized, buildable details.

3. Certified Welding Excellence

20+ coded welders across all processes. SAW for long seams, MIG for production, TIG for stainless/alum, MMA for site. WPS/WPQR current.

4. Local Facility, Global Standards

202 Seke Road, Graniteside – 2,000m², craned, climate-controlled paint booth. Output matches international yards.

5. Zimbabwe Condition Expertise

  • Wind: Cyclone-rated Eastern Highlands, Harare microclimate
  • Seismic: Harare zone, mine-induced seismicity areas
  • Corrosion: Industrial (Msasa, Southerton), coastal (imported), rural
  • Materials: Local sourcing strategies, import substitution, lead time management

6. Proven Track Record

50,000+ tonnes fabricated & erected since 2015. References: Harare CBD towers, Mutare smelter, Victoria Falls hotel, Bulawayo warehouse park, Kariba infrastructure.

7. Commercial Flexibility

  • Lump sum EPC – Design, supply, erect, commission
  • Supply & erect – Client design, we fabricate/install
  • Fabrication only – Delivered to site, your erectors
  • Erection only – Your steel, our crew, our cranes
  • Labour hire – Coded welders, riggers, supervisors

8. Warranty & Support

  • 10-year structural warranty on fabrication/erection
  • Design professional indemnity – Adequate coverage
  • Local presence – 202 Seke Road, Graniteside – we’re here for the lifecycle
  • Emergency response – +263713831536 / +263772974492 for critical issues

Project Portfolio Highlights

Harare – 18-Story Commercial Tower

Scope: 2,800t structural steel – composite beams, concrete core, transfer floor Challenge: Tight CBD site, tower crane coordination, 18-month program Innovation: Cellular beams for service integration, 16m spans, prefab stair modules Result: Topped out ahead of schedule, zero NCRs on steelwork

Mutare – Ferrochrome Smelter Expansion

Scope: 1,200t process structures – conveyor galleries, furnace buildings, pipe racks Challenge: Operating plant, high-temperature environment, shutdown windows Innovation: Modular pre-assembly, night shifts, 3D scan clash detection Result: Completed within 14-day shutdown, no production loss

Victoria Falls – Luxury Lodge Villas

Scope: 180t lightweight steel framing – 12 villas, curved roofs, elevated decks Challenge: Remote site, wildlife area, no crane access, manual handling Innovation: Bolted connections only, pack-flat delivery, community labor training Result: 8-week erection, minimal environmental footprint

Bulawayo – Logistics Warehouse Park

Scope: 6 x 5,000m² warehouses – 3,600t portal frames, mezzanines, docks Challenge: Fast-track 6-month program, multiple simultaneous sites Innovation: Standardized portal design, kit-of-parts, mobile fabrication crew Result: All 6 operational within program, 15% cost saving vs. concrete

Technical Resources & Standards

Design Codes Applied

  • SANS 10162 – Design of steel structures (primary Zimbabwe code)
  • SANS 10160 – Basis of structural design & actions
  • SANS 10400 – National Building Regulations
  • Eurocode 3 (EN 1993) – International projects, client requirement
  • AISC 360/341 – US-spec projects, seismic design
  • BS 5950 – Legacy projects, specific client mandates

Software Suite

  • Tekla Structures – 3D modeling, detailing, BIM, NC data
  • Prokon / MasterSeries – Structural analysis & design
  • SAP2000 / ETABS – Complex frame analysis
  • Autodesk Robot – Code checking, optimization
  • Navisworks – Clash detection, 4D simulation
  • Advance Steel – Alternative detailing platform

Certification & Compliance

  • SAISC membership – Southern African Institute of Steel Construction
  • AWS D1.1 – Structural welding code compliance
  • ISO 3834 – Welding quality requirements (working towards)
  • CIDB registration – Contractor grading for public works

Start Your Structural Steel Project

From concept to completion – we deliver structural certainty.

  1. Early Engagement – Best value at concept stage. Email admin@flypolealumin.co.zw with project brief
  2. Feasibility Study – Budget pricing, system options, program assessment – often free
  3. Design Development – Collaborative engineering, value options, risk identification
  4. Tender / Negotiated Price – Transparent breakdown, provisional sums identified
  5. Detailing & Fabrication – Tekla model approval, fabrication drawings, QC plan
  6. Delivery & Erection – Sequenced logistics, certified erection, as-built survey
  7. Handover – Certification, warranties, maintenance guide, BIM handover

Contact Flypole Alumin Structural Division: +263713831536 | +263772974492 admin@flypolealumin.co.zw 202 Seke Road, Graniteside, Harare www.flypolealumin.co.zw

Flypole Alumin – Engineering Steel Structures That Stand the Test of Time. Since 2015.

Post a Comment